top of page

pH Correction systems

pH Correction system - Re-circulation

Re-circulation is used in multiple applications from wastewater to process water correction, using a re-circulation pump rated to the duty required the process water is sampled for pH value and adjusted if required as it is sent back to the tank.

This process can be controlled by a 7 day time clock or a PLC. For more advanced applications, we offer many options for the re-circulation system including: 

  • Data logging

  • Remote monitoring/control

  • Dual pH monitors

  • Temp monitoring

  • Conductivity monitoring and control 

  • In-tank agitators 

  • Filtration of process water for reuse

  • Chemical tanks and bunding

pH Correction system - Batch

A batch cycle is a simple 3 step process to neutralize plant pH value

  1. Fill batch tank with plant wastewater

  2. Adjust to required pH range 

  3. Send corrected water to final destination (reuse or sewer)

The complete batch process takes between 45-60min and systems are sized to the plant output per hour. For large outputs over short periods ie; only producing wastewater over a 6 hour period, then a large holding tank is to be used to collect water from plant before been transfer into the batch tank for correction and discharge.

All batch cycles final pH, Temp values and volume of water are recorded along with the time and date, this is stored on a local USB stick and can be assessed with remote access to the system if enabled.

  • Remote monitoring/control

  • Dual pH monitors

  • Conductivity monitoring and control 

  • Filtration of process water for reuse

  • Chemical tanks and bunding

pH Correction system - Inline

Inline correction is most commonly used on clean process / potable water to make minor changes to the pH value as the water is flowing from one destination to the other ie; tank to tap.

Inline pH correction may be used for the following applications:

  • Adjusting to a pH range suited to disinfection

  • Agriculture pH range to suit nutrients uptake 

  • Process water reuse pH neutralization 

Inline pH systems can be supplied as complete all in one system, ready for connection to the excising system. It can also come as a prefabricated pipe that can be installed into the system or in component form to be fitted into existing pipework.

  • Data logging

  • Remote monitoring

  • Dual pH monitors

  • Temp monitoring

  • Conductivity monitoring and control 

  • Chemical tanks and bunding

IMG_0899.jpg
bottom of page